中文

Taiwan standard series Economical standard series Special machine for 3D air duct Special machine for PC barrel Special machine for seat Special machine for tool case Special machine for high barrier bottle Special machine for large water tank Special machine for panel Special machine for IBC tank Special machine for auto fuel tank

Taiwan standard series

Every product is estimated by the designer for the environment habit of using and the trend. We have expertise research and study department and sales service net around the country. We also have advanced equipment and personnel. All these can help us to grasp the chance at any time and quickly provide the best service for you.

INCLINE mold moving type:

Model			HFBC45 2L single station	HFBC65 5L single station	HFBC80 12L single station	HFBA55R 2L double station	HFBA65R 2L double station	HFBA75R 5L double station
Extrusion system	Screw diameter(MM)		45	65	80	55	65	75
	LD		24	24	24	24	24	24
	Extrusion power (KW)		11	18.5	30	15	18.5	30
	Plasticizing capacity (KG/H)		30	60	90	45	60	80
Clamping system	Mold platen dimension (W*H, MM)		270X330	350X400	520X420	250X320	285X380	350X400
	Mold moving stroke (MM)		350X15°	390X15°	600X10°	400X20°	420X20°	447X20°
	Clamping stroke (MM)		80--330	100-560	200-560	80-330	80-410	100-560
	Clamping force (KN)		38	78	120	32	58	78
Die head	Centre distance (MM)	double	130	150	280	130	130	150
		three	70	110	150	70	80	110
		four	60	80	80	60	60	80
		six	---	---	80	---	----	----
Hydraulic system	Oil pump motor power (KW)		5.5	5.5	15	5.5	5.5	15
Hydraulic system	System pressure (Mpa)		10	10	10	10	10	10
Common data	Voltage/ Frequency		380v/50Hz	380v/50Hz	380v/50Hz	380v/50Hz	380v/50Hz	380v/50Hz
	Total rated power (KW)		30	42	70	38	42	68
	LWH (M)		2.65X1.6X2.3	3.2X1.8X2.7	3.6X2.3X2.8	2.8X2.4X2.6	3.3X2.4X2.7	3.3X2.4X2.8

LINEAR mold moving type:

Model			FJA/C65 5L single station	FJA/C80 12L single station	FJA/C65R 2L double station	FJA/C80R 5L double station	FJA/C90R 12L double station
Extrusion system	Screw diameter(MM)		65	80	65	80	90
	LD		24	24	24	24	24
	Extrusion power (KW)		18.5	30	18.5	30	45
	Plasticizing capacity (KG/H)		60	90	60	90	130
Clamping system	Mold platen dimension (W*H, MM)		380X360	550x450	350X350	380X360	550x450
	Mold moving stroke (MM)		425	620	425	460	660
	Clamping stroke (MM)		200-560	240-610	150-450	200-560	240-610
	Clamping force (KN)		100	200	58	100	200
Die head	Centre distance (MM)	double	150	280	130	150	280
		three	110	150-180	80	110	150-180
		four	80	120	60	120	120
		six	---	80	---	---	80
Hydraulic system	Oil pump motor power (KW)		11	15	11	22	30
Hydraulic system	System pressure (Mpa)		12	12	12	12	12
Common data	Voltage/ Frequency		380v/50Hz	380v/50Hz	380v/50Hz	380v/50Hz	380v/50Hz
	Total rated power (KW)		45	70	48	78	108
	LWH (M)		3.7X1.8X2.7	4.4X2.2X2.8	3.2X1.7X2.6	4.2X3.0X2.8	4.8X4.3X2.97

Note： 1. The total rated power means the machine with single die head and without ex-extrusion.

2.The data in list is just for reference.

Online Inquiry

Prev：No Prev

Next：No Next