Special machine for 3D air duct
Product Description:
Equipped with the sequential ejection die head system (SECO), this model allows products to achieve a "soft - hard - soft" structure. The use of two kinds of materials having different characteristics can produce a high-performance ventilation tube. The tube pieces is easy to dismantle, and has shock-absorbing, shrinkage and heat expansion and other features.
Equipped with the "vacuum" defect parison traction device, it can achieve the minimum amount production of flash on the product and thus save the materials. The product’s inner surface is smooth, which greatly increase the pressure resistance of the tubes.
Equipped with axial and radial (in X and Y directions) wall thickness control devices, it can ensure the uniform wall thickness of products, especially for the part with small curvature of products.
|
设备基本型号 Equipment Model |
|
FP2-200 |
FP-200 |
|
|
空循环周期 Dry cycle time |
Pc/h |
180 |
||
|
合模装置 Clamping device |
合模装置型号 Model of clamping unit |
|
C500 |
|
|
锁模力 Clamping force |
KN |
500 |
||
|
模板尺寸(宽×高) Platen size (L*H) |
mm |
1050×1000 |
||
|
模板间距 Mold stroke |
mm |
300～1200 |
||
|
合模行程 Stroke of mold clamping |
mm |
450 |
||
|
合模速度 Speed of mold closing |
mm/s |
200 |
||
|
移模行程 Stroke of mold platen movement |
mm |
450 |
||
|
A挤出机 Extruder |
E55 |
|
〇 |
〇 |
|
E65 |
|
● |
● |
|
|
E75 |
|
〇 |
〇 |
|
|
E90 |
|
〇 |
〇 |
|
|
B挤出机 Extruder |
E55 |
|
〇 |
|
|
E65 |
|
● |
||
|
E75 |
|
〇 |
||
|
E90 |
|
〇 |
||
|
A 储料缸 accumulator |
HP-1 |
|
〇 |
〇 |
|
HP-1.5 |
|
● |
〇 |
|
|
HP-2 |
|
〇 |
〇 |
|
|
HP-2.5 |
|
〇 |
● |
|
|
HP-5 |
|
〇 |
〇 |
|
|
B 储料缸 accumulator |
HP-1 |
|
〇 |
|
|
HP-1.5 |
|
● |
||
|
HP-2 |
|
〇 |
||
|
HP-2.5 |
|
〇 |
||
|
顺序射出模头 Sequence injection die head |
最小口模直径 Min. nozzle |
mm |
15 |
15 |
|
最大口模直径 Max. nozzle |
mm |
80 |
80 |
|
|
模头加热功率 Heating power on die head |
KW |
37 |
30 |
|
|
轴向控制点数 Points of axial direction |
|
100 |
100 |
|
|
X向径向控制点数 Points of X-radial direction |
|
100 |
100 |
|
|
Y向径向控制点数 Points of Y-radial direction |
|
100 |
100 |
|
|
真空牵引 Vacuum traction
|
最大流量 Max. flow |
m3/h |
530 |
|
|
最大吸力 Max. suction capacity |
mbar |
-320 |
||
|
功率 (Power) |
KW |
7.5 |
||
|
吸风量调节 (Suction volume adjustment) |
|
伺服控制 Servo control |
||
|
机台升降行程 (Framework lifting stroke) |
mm |
450 |
450 |
|
|
油泵电机功率 (Oil pump motor power) |
KW |
48 |
48 |
|
|
伺服电机功率 (Servo motor power) |
KW |
4 |
4 |
|
|
最大总功率 (General power) |
KW |
160 |
160 |
|
|
平均能耗 (Average consumption) |
KW/h |
70 |
70 |
|
|
压缩空气耗量 (Compressed air consumption) |
m3/h |
0.8×1 |
0.8×1 |
|
|
冷却水耗量 (Cooling consumption) |
m3/h |
0.3×10 |
0.3×10 |
|
|
外形尺寸(长×宽×高) General dimension (L×W×H) |
m |
6.3×3.8×4.4 |
6.3×3×4.4 |
|
|
整机重量 Overall Weight |
ton |
30 |
26 |
|
以上技术参数仅供参考，设备说明书上技术参数为准。●表示基本配置 〇表示可选配配置
The data listed in table is for reference any modification will not be notified
●basic configuration 〇optional configuration
挤出机主要技术参数
Main Applications Of Extruder
|
挤出机型号 Extruder model |
|
E55 |
E65 |
E75 |
E90 |
|
螺杆直径 Dia. Of screw |
mm |
55 |
65 |
75 |
90 |
|
长径比 L/D |
|
25:1 |
25:1 |
25:1 |
30:1 |
|
最大螺杆转速 Max. rotating speed |
rpm |
90 |
90 |
85 |
87 |
|
挤出量 Extrusion capacity |
Kg/h |
50 |
60 |
90 |
120 |
|
电机功率 Motor power |
KW |
15 |
18.5 |
30 |
55 |
|
加热功率 Heating power |
KW |
8.8 |
11.8 |
17 |
24.6 |
以上技术参数仅供参考，设备说明书上技术参数为准 。
The data listed in table is for reference any modification will not be notified
储料缸主要技术参数
Main Applications Of Accumulator
|
储料缸模头型号 Model of die head |
|
HP-1 |
HP-1.5 |
HP-2 |
HP-2.5 |
HP-5 |
|
最大储料容积 Max. volume of die head |
L |
1 |
1.5 |
2 |
2.5 |
5 |
|
最大储料量 Max. accumulator |
Kg |
0.75 |
1.1 |
1.5 |
1.9 |
3.75 |
|
注射速率 Injection speed |
Kg/s |
0.5 |
0.5 |
0.5 |
0.5 |
1 |
以上技术参数仅供参考,设备说明书上技术参数为准
The data listed in table is for reference,any modification will not be notified
*
Prev：No Prev
Next：No Next
